Links are not yet activated.
Is this your press release? Add a link to submitpr.org on your website and verify it — activation is instant and free.
Or upgrade once for permanent activation (from $19.95, pay with crypto).
WUXI, China — Beyond basic width and oven data, Wuxi Runda Dye-Finishing Equipment Factory publishes a set of JRD hot-air stenter accessories and mechanical details that matter at installation: high-precision infrared edge sensing, a three-finger silent expander for knit and woven fabric, a synchronized brush overfeed and pin-pressing device with variable-frequency control, and oven sections built as 3 m modules.The JRD series is a hot-air circulation stenter for dewatering, finishing, drying, baking and heat setting. Fabric is held by pins, clips, or a combined pin-clip chain and carried through a row of hot-air chambers. Infrared edge sensing is listed together with a cast-iron rail. Cloth-edge tracking with infrared sensing is also listed among accessories, so selvedge position can be followed during width setting.
A three-finger silent expander is published for both knit and woven fabric. The synchronized brush overfeed and pin-pressing device is under variable-frequency control. Entry and delivery combinations can be selected by the customer. Fabric delivery is published as swing or roll. Nominal speed is 100 m/min. Overfeed range is −10% to +100%. Nominal width is 1,800–3,400 mm, with width adjustment 900–3,200 mm. Oven temperature is 220 °C. Heat source may be heat transfer oil, city gas or electric heating. Drive side may be left or right. An example installed capacity is 130 kW for an 8-section, 180 model. Section count, width and heat source are fixed per order.
Because each oven section is 3 m, mills can scale chamber length by adding sections rather than changing the chamber design. Typical published uses include heat setting of polyester and polyester-blend woven and knit fabric, drying and width setting after dyeing or padding, and curing of resin and soft-hand finishes. Enquire with fabric type and weight, widest cloth width, speed or daily output, process (dry, set or cure), heat source and destination.
About Wuxi Runda Dye-Finishing Equipment Factory
Backed by the Wuxi Qianzhou textile dyeing and finishing machinery platform, we can supply virtually the full equipment line and deliver an optimized solution for the mill. German technology, built in China — licensed airflow dyeing technology from Germany, manufactured locally in Wuxi, China, combining European engineering quality with local pricing. The factory’s patented 16-tube RD HT airflow dyeing machine is published at a liquor ratio of 1:2.5 (cotton as low as 1:3–1:3.5, synthetics as low as 1:2–1:2.5). Other published lines include the SWRl400 jumbo jigger, the JRD hot-air stenter (1,800–3,400 mm, oven 220 °C), and HTHP overflow dyeing machines (maximum 145 °C, liquor ratio 1:6–1:12). Founded January 2004 in Qianzhou, with a workshop of about 3,000 square meters. Export markets include Vietnam, India, Bangladesh, Indonesia, Pakistan, Japan and Thailand.
Heng Bao
+86 13382239366
bao@runda2008.com
https://www.runda2008.com/