Links are not yet activated.
Is this your press release? Add a link to submitpr.org on your website and verify it — activation is instant and free.
Or upgrade once for permanent activation (from $19.95, pay with crypto).
Ofwat’s PR24 final determinations allow £104 billion of water company expenditure between 2025 and 2030, including a 17% reduction in leakage. Much of that work will be delivered through pipelines laid in steep, congested or confined ground, where joint design becomes an engineering decision rather than a catalogue choice.Why Joint Restraint Matters
Internal pressure creates axial thrust wherever a pipeline changes direction or diameter, or ends: at bends, tees, reducers and blank ends. Standard push-in joints are not designed to resist that thrust, so it is usually carried by concrete thrust blocks. Flanged joints resist thrust but are rigid. Restrained joint ductile iron pipes lock spigot to socket, transferring thrust along the pipeline while keeping some angular deflection.
How Rashmi-LOCK Works
Rashmi-LOCK is a self-restrained, semi-flexible push-in joint for ductile iron pipes from DN 100 to DN 1000. A locking arrangement within the socket carries axial load, while the joint can still deflect to follow the alignment. Published allowable operating pressure (PFA) reaches up to 100 bar and deflection up to 5°, but both vary by diameter, so check the size-specific table and confirm with Rashmi’s technical team.
Where It Fits
Steep gradients: resists joint separation where gravity and pressure combine.
Restricted trenches and congested corridors: reduces reliance on thrust blocks where space or ground conditions make them impractical, based on a calculated restrained length.
Trenchless installation: suitable for some methods, such as pipe pulling, subject to project-specific confirmation.
Bridge crossings and high-pressure mains: where joint integrity under thrust is critical.
Flanged pipe (PN 10 to PN 40) remains the right choice for rigid connections at valves, pumps and chambers. The two systems complement each other.
Why Rashmi Metaliks UK
Rashmi Metaliks’ ductile iron pipes received DWI approval in 2026, and the company supplies pipes, fittings and flanged pipe to UK water, wastewater and infrastructure projects. Its team can support designers on restrained lengths, pressure ratings and approvals.
Contact Rashmi Metaliks UK to discuss whether Rashmi-LOCK suits your next scheme